{{product['name']}}

remarks

* Please choose the paint color and paint color from the following colors.
● Paint color　
(1) White Pearl Crystal Shine << 070 >>
(2) Black Mica << 209 >>
(3) Metal Stream Metallic << 1K0 >>
(4) Yellow　 << 5A3 >>
(5) Emotional Red II << 3U5 >>
(6) Orange Metallic << 4R8 >>
(7) Nepula Blue Metallic << 8X2 >>

● Colors for different painting
(1) Black << 202 >>
(2) Matte Black
(3) Gun Metallic << 1E3 >>
(4) Champagne Gold << 4T1 >>

------ For customers who purchase and install, please check the precautions for safety -------

● About the demo car
　・ The vehicle in the image is CG (processed image) ..
　　* It may differ from the actual one.
　・ The vehicle in the image is S grade.
　-The vehicle in the image is lowered by the harmonic drive.
　-The vehicle in the image is equipped with a separately painted product.
　-The vehicle in the image has the net painted black.　
　-The vehicle in the image is equipped with white LED spot lamps.
　-The vehicle in the image is equipped with a PREMIUM01S muffler (titanium tail).


● Vehicles
　* 1 Compatible with all grades. (Rear wing is for G / GT / GR grade only)
　* 2 For S / ST grade only * Cannot be installed on G / GT / GR grade and vehicles equipped with rear fog lights.
　* 3 All nets attached to the product are silver.　
　* 4 Cannot be installed at the same time as TOYOTA original accessories.
　* 5 Cannot be installed at the same time as modellista parts.
　* 6 Cannot be installed at the same time as TRD parts.　
　* 7 It is necessary to drill holes in the vehicle for installation.
　* 8 Mounting is double-sided tape. * No drilling is required.
　* 9 Compatible with genuine muffler / ROWEN muffler.
　* 10 Not compatible with vehicle inspection (At the time of vehicle inspection, please turn off the power with the attached remote control and hide the rear wing lens surface with a cutting sheet or vinyl tape.)
　* 11 Electronics Rear Wing Type-II has been discontinued. rice field. It has been switched to Type-Ⅲ.　

● About
　the product ・ Please check the product and accessories immediately after the product arrives.
　　* We take the utmost care in packaging, but please check for product differences and shortages immediately after arrival.
　-Please note that we will not accept any returns / complaints regarding items that are more than 10 days old from the date of arrival of the product.
　・ Please note that we cannot accept any complaints after painting / processing.
　・ Before mounting the vehicle, be sure to temporarily align it with the vehicle and check the fitting and mounting holes.
      If necessary, use a file or a drill to make adjustments.
   -The net attached to the product is all silver.


● Dealers
　・ ROWEN products can be purchased at dealers, dealers, and car shops nationwide.
　・ For details, please check from Company Information ⇒ Authorized Dealers / Distributors / Distributors / Dealers.
　　http://www.rowen.co.jp/company/dealer/#content


● Precautions regarding product installation
　・ As a general rule, products are assumed to be installed on standard vehicles (normal vehicles).
　・ In principle, our products cannot be combined with manufacturer option and dealer option parts.
　・ Some may be compatible, so please contact us for details.
　・ When aero parts are installed, the clearance with the road surface becomes narrower, and it may be easier to interfere with the road surface due to steps such as curbs and slopes.
　-Please note that resin (FRP) products are generally vulnerable to impacts.
　-It is necessary to drill holes in the bumper (body) when installing our product.
　・ Depending on the installation of our products, the garage jack etc. may not be usable at the specified position. Please note.
　・ Product specifications and installation methods are subject to change without notice.

　

● Painted products
　・ Painted products are painted without temporary alignment with the current vehicle, so be sure to perform temporary alignment before mounting on the vehicle for fitting.

　  And check the mounting holes. If necessary, use a file or a drill to make adjustments.
　-Painting will be a genuine approximation color.
　-Painted products will be painted with paint based on the body color based on the toning data specified by each automobile manufacturer.
　・ Even with the same paint, even in the body of a new car, color differences can be seen due to the difference in the base material between the door, bonnet and bumper.

  　 There is a color difference.
　・ When it comes to vehicles after registration, the color of the paint has changed due to deterioration over time (due to the ultraviolet rays of the sun, acid rain, etc.), and the color immediately after painting of the new car

   　There will be a difference.
　・ When it comes to pearl type and metallic type, there will be a significant color difference due to differences in pearl and metallic content and particles.
　-The characteristic of pearl and metallic is that the color changes depending on the viewing angle, and it does not look the same color unless the bumper surface and the aero parts surface are the same.
　-Since painted products are painted without color matching with the current car, there may be slight color differences due to individual differences in vehicles, paint production lots, etc.

　Please consider the above points and consider purchasing painted products.

● About the LED spot lamp
[About the LED spot body]
　・ Before starting the installation work, be sure to disconnect the wiring of the vehicle battery before starting the work.
　-This product is manufactured exclusively for DC12V vehicles. It cannot be used for vehicles with other voltages.
　・ Be sure to check the lighting of the LED spot lamp body before installing it. In the unlikely event that an initial defect occurs, please contact the place of purchase.
　-The LED may be damaged if a surge voltage (overvoltage) is applied, so stop the connection if a voltage of 14.5V or higher is applied to the wiring to be connected.
　-When connecting, be sure to connect from the ground side (black wiring). There is a risk of damage if connected from the positive side.
　・ Please refrain from starting the engine with the LED lit.
　・ Be sure to insert the wiring coupler all the way to the base.
　-Please organize the wiring so as not to put a burden on the root of the wiring on the main body side and the root of the coupler.
　* Be sure to follow the above items correctly and install the LED spot lamp.
　* Please note that the warranty does not cover any installation work other than the above items.
　* The warranty card attached to the product is required when returning or exchanging. Please keep it in a safe place. We cannot accept returns or exchanges without a warranty card.
　　Please note.

[About waterproofing]
　-Insert each connector until it locks according to the installation manual. It may cause a malfunction due to poor contact while driving or water getting inside the main body.
　　Be sure to read the installation manual carefully and install using the correct procedure and method.

[LED spot color]
　・ Please choose from white / blue.

[LED spot warranty period]
　・ It will be 6 months from the date of purchase. Repair parts are also available.
　　Repair parts　
　　LED spot lamp Φ15 (6I0001) 1,800 yen (excluding tax) / piece
　　ABS chrome plated base (set of 8 LED spots) 28,000 yen
　　http://www.rowen.jp/shopdetail/000000002709/ct483/page1/ order /


● Inquiries about products
　ROWEN Division
　TEL: 0565-52-8555
　Mail: info@rowen.co.jp
　Business hours: 9:00 to 18:00
　except Sundays, holidays and designated regular holidays

remarks

・ Vehicle inspection compatible (replacement muffler pre-certified product enforced in April 2010)

・ All stainless steel
・ Tail end / Φ120 oval 4 left and right tails

・ For ROWEN rear under diffuser only. Click here

for the genuine bumper compatible muffler .