{{product['name']}}

MODELLISTA BRIGHT TECH ELEGANCE For TOYOTA Sienta

BODY KIT

BRIGHT TECH ELEGANCE

• 

  Front Spoiler

• 

  Side Skirt

• 

  Rear Spats

• 

  Rear Spats & Muffler Tips

OTHER OPTION

• 

  Hood Garnish

• 

  Side Door Garnish

• 

  Mirror Garnish

• 

  Back Door Garnish

• 

  Roof Spoiler

• 

  Door Handle Garnish

• 

  15inch Alloy WheelMODELLISTA TRINITASⅡ〈Black × Polish〉

• 

  15inch Alloy WheelMODELLISTA TRINITASⅡ-Cross〈Gun metallic × Polish〉

  • *1.The following codes are added for each color for genuine color painted. White Pearl Crystal Shine: A1, Dark Gray: B0, Black: C0
  • ※2.The muffler cutter is not included with the rear spats.
  • ※3.Rear spats and muffler cutter must be installed at the same time.
  • *4.The standard tires (185/65R15) are used.
  • ※5.Price includes center cap, valve and nut.
  • *6.The utility hall on the back door side cannot be used. Please note.
  • *7. Excluding vehicles with protection film (door handle)
  • ※8.Please use it by attaching it to the passenger seat. Please be very careful when changing the seat position with the assist grip attached. Depending on the position, it may interfere with the seat or the seat may not be raised. In that case, remove the assist grip before operating the seat.

• Drilling into the vehicle body is required.

  [Handling Precautions]

  • ●Never attempt to modify the product after purchase, as doing so may result in a serious accident or failure.
  • ●In principle, Modellista parts cannot be combined with "Toyota genuine products". However, some items may be combined. For details, please contact the Modelista Call Center.
  • ● Garage jack may not be usable at the specified position due to installation of Modellista parts. Please note.
  • ●When towing a vehicle equipped with a front spoiler, the front spoiler may be deformed.

  [Aero Parts]

  • ●If aero parts are installed, the clearance from the road surface will become narrower, making it easier to interfere with the road surface due to steps such as curbs and slopes. Also, the aero parts may be damaged if you drive with the raschel in snow or use it in a frozen (icing) state.
  • ●Aero parts are made of resin (ABS/polypropylene). Please note that resin (ABS/polypropylene) products are generally vulnerable to impacts. Please be careful especially in extremely cold weather.
  • ●Regarding painted parts, the paint color may not match the standard car completely.

  [Back door mounting parts]

  • ●If any of the back door parts are installed, it may be difficult to fully open the back door depending on the usage environment (low temperature, etc.). In addition, it may be difficult to fully open the back door when installing these products attached to the back door at the same time.

  [Aluminum wheels/tires]

  • ★When installing an aluminum wheel set, the running noise may increase and the drainage performance on rainy days and the grip on snowy/frozen roads may decrease. Also, ride comfort and steering stability may differ from standard vehicles. They may wear out faster than standard car tires. Tire chains may not be used. Please note.
  • ●Do not use the aluminum wheel set for other than the compatible car model/grade.
  • ●If you install tires other than those set, such as studless tires, there is a possibility of interference.

  [Muffler cutter]

  • ●When the rear styling kit is installed, the clearance from the road surface becomes narrower, making it easier for the vehicle to interfere with the road surface and protrusions due to steps such as curbs and slopes. Also, the sound quality and performance may change. Due to the characteristics of the material used for the muffler cutter, heat can cause discoloration or rust on the surface.
  • 
    

  【guarantee】

  • ● The warranty period for Modellista parts is one year from the date the parts are installed on the vehicle, excluding some consumables. However, the mileage is limited to 20,000 km even within that period.