描述

LED Fiber Reflector

Description of item
Product nameFiber reflector Sequential blinker Flowing blinker Tail lamp Back lamp
Description of item■Product contents: Main unit x 2 (left and right set)

■Operating voltage: DC12V

■LED type: 3030SMD

■Emitting color: Red Turn signal emitting color: Red

■Lens color: Red

■Emitting pattern: Small (30%) / Brake (100%) ) / Flowing turn signal

■ Waterproof: IP67

[Wiring]

Black line: Ground
White line: Small
Red line: Brake
Yellow line: Flowing turn signal


■ LED reflectors that do not normally shine. Adopts a double action method of 30% lighting when in position and 100% lighting when braking.

■ Set of 2 left and right LED rear tail fiber lamps with flowing turn signals.

■ By installing high brightness LED to the last minute, it is super luminous beautifully and neatly!

■ Improve visibility from following vehicles and prevent accidents!

■ Just connect the brake, ground, flowing blinker, and small wiring, so it's easy to connect.



[Compatible models]

SAI 10 series

Alphard 30 series/X/G/GF

Alphard 20 series/240S/350S

Alphard Hybrid 20 series/SR wish Early 20 series/1.8S/2.0Z wish Late 10 series

wish Late 20 series/1.8A/1.8S/2.0Z





Vellfire 30 series/X/V/VL

Vellfire 20 series/240Z/350Z

Vellfire Hybrid 20 series/ZR

Voxy 70 series

Camry 50 series

Corolla Axio 160 series

Corolla Fielder Series 160

Crown Series 210

Noah Series 70

Harrier Series 60

Mark X Series 130 Lexus

ISF USE20

Daihatsu Move Custom LA100S/LA110S



[Caution]

●There may be a time difference between the lighting of the left and right after a hazard.

●Because there is no reflection function, it is not compatible with vehicle inspection. Please prepare reflective tape separately at the time of vehicle inspection.

●Due to individual vehicle differences, if the small parts react in conjunction with the brakes when the lights are off, or if warning lights such as the skid warning light turn on, there is a possibility that the current is flowing backwards. . In that case, please prepare a resistor separately.

●A separate blinker relay may be required when connecting the blinker wire.