{{product['name']}}

Adjustable Rear Upper Arm
● Corrects the camber angle to an appropriate level to improve tire internal burrs and unstable behavior.
● Improves tire placement, improving braking performance and running stability. Up
● It is possible to finely adjust the clearance between the tire and the fender
Turnbuckle type that can be adjusted while wearing it
● With structural change correspondence documents (separate application required)
● Reliable domestic design and domestic production

[Compatible model]
　ZYX10 (FF / 1800cc hybrid)
　NGX50 (4WD / 1200cc turbo)

　Turn buckle adjustment type / rubber bush type
　Adjustment range Genuine ratio +15 to -8mm
　Reference mounting time 1 hour (excluding alignment adjustment work)
　Strength test results Attached to the manual (remodeling application is required to install this product)

[Product code] 1A1-474-L
[JAN code] 4996338024329
May 10, 2022 Revised price

Stabilizer Product Information

Enhanced Stabilizer Front
● Suppresses roll (inclination of the vehicle body) during cornering without changing the ride quality ●
Effectively suppresses unpleasant rolls that occur when changing lanes on mountain roads and highways, as well as cars Highly effective against sickness

[Compatible model]
　ZYX10 (FF / 1800cc hybrid)
　NGX50 (4WD / 1200cc turbo)

　Solid Φ28 (genuine is hollow Φ27)
　131% compared to genuine
　No accessories
　Reference installation time 2.5 hours

[Product code] 1A7-311-A28
[JAN ] Code] 4996338062369

Reinforced stabilizer rear (for front-wheel drive vehicles)
● Suppresses roll (inclination of the vehicle body) during cornering without changing the ride quality ●
Effectively suppresses unpleasant rolls that occur when changing lanes on mountain roads and highways , Highly effective against car sickness [Compatible model] 　ZYX10 (FF / 1800cc hybrid) * NGX50 (4WD / 1200cc turbo) cannot be installed　Solid Φ26 (genuine is hollow Φ24.5) 　125% 　dedicated bush compared to genuine -Reference installation time with bracket 　1.0 hour [Product code] 1A7-311-B26 [JAN code] 4996338062376




　

Strut bar information

Strut bar front
● Cusco's standard body rigidity parts
● Simple yet effective body reinforcement is possible
● Lightweight aluminum high-rigidity shaft with oval cross section is adopted

[Compatible model]
　ZYX10 (FF / 1800cc hybrid)
　NGX50 (4WD / 1200cc turbo)

　type-OS Shaft type 3
　Reference mounting time 0.5 hours

[Product code] 1A7-540-AN
[JAN code] 4996338039293

Product compatibility was divided depending on the vehicle year due to differences in specifications, but 1A7-540-AN is now compatible with all models (as of September 9, 2019) * Old product number 1A7-540-A (discontinued product) Will be compatible with vehicles produced in October 2018.

Power brace product information

Power brace front
● Achieves more linear controllability and stability by increasing the rigidity of the front section ●

Increases body rigidity and suppresses body distortion, unpleasant movement, and aging deterioration due to twisting

● Demonstrate the original performance of the suspension by increasing body rigidity And you can experience sharp handling

[Compatible model]

　ZYX10 (FF / 1800cc hybrid)

　NGX50 (4WD / 1200cc turbo)

　Steel (STKM) Oval shaft (t = 1.6mm)

　Bolt-on mounting, minimum ground clearance design

　Reference mounting time 1.0 hour

[Product code] 1A1- 492-F

[JAN code] 4996338048516

Power brace center

● By increasing the rigidity of the center section, twisting of the entire body is effectively suppressed and high-speed stability is also improved.

[Compatible model]
　ZYX10 (FF / 1800cc hybrid)
　NGX50 (4WD / 1200cc turbo)

　Steel (STKM) Oval shaft (t = 1.6mm)
　Bolt-on mounting, minimum ground clearance design
　Reference mounting time 1.0 hour

[Product code] 1A1- 492-C
[JAN code] 4996338048523

Power brace Rear

● Improved controllability, turning performance, traction, etc. by increasing the rigidity of the rear section

[Compatible model]
　ZYX10 (FF / 1800cc hybrid)
　NGX50 (4WD / 1200cc turbo)

　Steel (STKM) Oval shaft (t = 1.6mm)
　Bolt-on mounting, minimum ground clearance design
　Reference mounting time 0.5 hours

[Product code] 1A7- 492-R
[JAN code] 4996338048646

Sports oil filter
● Equipped with a strong magnetic force magnet to catch fine iron powder in engine oil
● Special filter paper greatly improves filtration performance
● Improves durability and reliability even under harsh conditions such as sports driving
● Adopts a reinforced relief valve Also compatible with high-viscosity oil
● Equipped with a mesh filter that prevents the filter paper from being deformed or damaged even under harsh conditions

[Compatible model]
　NGX50 (4WD / 1200cc turbo)

[Specifications]
　Φ65 × H65 3 / 4-16UNF

[Product code] 00B-001-B
[JAN code] 4996338030771

Foldable tow hook
● Common to front / rear
● Bolt-on mounting to genuine tow hook mounting hole
● With check ball that can be folded and fixed at 0 degrees and 90 degrees with one touch
● Made of durable integrally molded high-strength steel without welding
● The stylish hook shape image in red color is an image.

[Compatible model]
　ZYX10 (FF / 1800cc hybrid)
　NGX50 (4WD / 1200cc turbo)

　Front / rear common setting (two are required when mounting front and rear)　
　Reference mounting time 0.2 hours

[Product code] 1A7-017-F
[JAN Code] 4996338061973

Adjust number stay
● The position of the license plate can be moved upward in 3 steps
● Along with the makeover of the front mask, the cooling effect from the front opening is also improved ●
Easy installation using the genuine license plate mounting hole
● Blue alumite painting ( Cusco Blue)

[Compatible model]
　ZYX10 (FF / 1800cc hybrid)
　NGX50 (4WD / 1200cc turbo)

　Aluminum blue alumite product
　Height adjustment 3 steps
　Cusco logo Laser engraved
　Reference installation time 0.2 hours

[Product code] 00B-550-AL
[JAN code ] ] 4996338001610


* This product is for moving the license plate upward, and the angle etc. cannot be changed.
* When the license plate is attached, the Cusco logo will not be visible.

The reference installation time shown on this page is generally the approximate time performed by a mechanic who has specialized training for the vehicle at a factory that has special tools for the vehicle.