{{product['name']}}

Parts information for Toyota GR Supra ( DB42 / DB22 / DB82 / DB02)

Stabilizer
● Parts that suppress roll (tilt of the car body) during cornering without changing the ride quality.
● Raises the limit of turning performance and realizes stable straight-line stability even at high speeds. Demonstrate a higher level of balance performance by exchanging the front and back at the same time.
Stabilizer Front

compatible model DB42 / DB22 / DB82 / DB02Product code 1C2-311-A28
JAN code 4996338062567
Genuine Φ24 hollow Cusco Φ28 hollow 194% (SZ-R 4-cylinder 258PS car)
Bush, With bracket * Other grade specifications unconfirmed
Reference installation time 1.0H

Stabilizer Rear
 
compatible model DB42 / DB22 / DB82 / DB02
Product code 1C2-311-B22
JAN code 4996338062574
Genuine Φ18 Hollow Cusco Φ22 Hollow 178 % (SZ-R 4-cylinder 258PS car)
Bush, with bracket * Other grade specifications unconfirmed　
Reference installation time 3.0H

Power brace

● Increases body rigidity and suppresses body distortion, unpleasant movement, and aging deterioration due to twisting. By increasing the body rigidity, you can experience the original performance of the suspension and experience sharp handling.
-Cuzco's classic body rigidity parts. Effectively suppresses body distortion.
● The "Power Brace Engine Room" has a special shape design to maximize the handling characteristics. The dress-up effect that adds glitz is also outstanding.
● Easy bolt-on installation (replaced with some genuine reinforcement parts). Designed to maintain the minimum ground clearance that also supports lowdown.

Power brace Engine room
upper mount and upper core support are connected with a high-strength steel oval shaft. Furthermore, by connecting the left and right with an aluminum oval shaft, the rigidity of the entire front is further increased.
 

Applicable model: DB42 / DB22 / DB82 / DB02
Steel oval shaft + aluminum oval shaft (type 2)
Product code: 1C2-492-ER
JAN code 4996338110121
Engine cover can be installed after installation
Reference Installation time 0.5H

Power brace
Remove the genuine aluminum panel from the rear, and connect multiple points around the rear with a high-strength aluminum (duralumin) plate and steel oval shaft + stay to greatly increase the rigidity.
 
Compatible model DB42 / DB22 / DB82 / DB02
High-strength aluminum (duralumin) plate + steel oval shaft + stay
Product code 1C2-492-R
JAN code 4996338110138
Bolt-on mountable (genuine aluminum panel) (Removal)
Reference installation time 0.5H Power brace Seat rail plus Front Seat rail Connect the front left and right to reduce the twist of the body. It can also be used as an anchor for attaching the crotch belt of a 5- or 6-point seat belt.

Compatible model
DB42 / DB22 / DB02 / DB02
* DB82 (SZ) genuine manual seat cannot be installed due to slide lever interference (can be replaced with BRIDE seat rails, etc.)
Steel plate box structure (painted finish)
Set of 2 left and right
Product code 1C2-492-SPF
JAN code 4996338110268
Bolt-on mounting possible No interior processing required
Reference mounting time 0.5H

* Seatbelt mounting using this product is not compatible with JAF official competition. In addition, please check the vehicle regulations of the participating event before using.
* If the seat is in the front position, it may interfere with the wiring connector under the floor. Power brace Seat rail plus Rear seat rail Connects the left and right sides of the rear to reduce body twist. It can also be used as an anchor for mounting a 4-point seat belt or waist belt. Compatible model DB42 / DB22 / DB82 / DB02 Mounting location / Type / Specifications Steel plate box structure (painted finish) Left and right 2 pieces Product code 1C2-492-SPR Tax-included price ¥ 20,900 Tax-excluded price ¥ 19,000 JAN code 4996338110275 Bolt-on mounting possible No interior processing required















Reference mounting time 0.5H

* Seatbelt mounting using this product is not compatible with JAF official competition. In addition, please check the vehicle regulations of the participating event before using.
* If the seat is in the front position, it may interfere with the wiring connector under the floor.

Power brace Trunk bar plus
Luggage room By replacing the genuine aluminum bar on the front side with a high-strength steel pipe, the rigidity around the rear is increased.
In addition, it is possible to attach eyebolts for attaching 4-point seat belts.
  
Compatible model DB42 / DB22 / DB82 / DB02
Steel oval shaft
Product code 1C2-492-TP
JAN code 4996338110145
Bolt-on mounting possible (replacement with genuine aluminum bar) No interior processing required
Reference installation time 1.0H

* Seatbelt mounting using this product is not compatible with JAF official competitions. In addition, please check the vehicle regulations of the participating event before using.

Foldable tow hook
● A tow hook with a check ball that can be folded and fixed at 0 and 90 degrees with a single touch.
● Made of durable integrally molded steel without welding. High strength setting. Stylish hook shape in red color.
● Bolt-on mounting to the genuine tow hook mounting hole.


Foldable tow hook front

 

Compatible model DB42 / DB22 / DB82 / DB02
Product code 1C2-017-F　
JAN code 4996338109477

Retractable tow hook Rear

 
compatible model DB42 / DB22 / DB82 / DB02
Product code 1C2-017-R
JAN code 4996338109484